HPE FlexFabric 5950 Series

214
display ipv6 rawip verbose
Use display ipv6 rawip verbose to display detailed information about IPv6 RawIP connections.
Syntax
display ipv6 rawip verbose [ slot slot-number [ pcb pcb-index ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pcb pcb-index: Displays detailed information about IPv6 RawIP connections of the specified PCB.
The value range for the pcb-index argument is 1 to 16.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays detailed information about IPv6 RawIP connections for all member
devices.
Examples
# Display detailed information about an IPv6 RawIP connection.
<Sysname> display ipv6 rawip verbose
Total RawIP socket number: 1
Location: slot: 6
Creator: ping ipv6[320]
State: N/A
Options: N/A
Error: 0
Receiving buffer(cc/hiwat/lowat/drop/state): 0 / 9216 / 1 / 0 / N/A
Sending buffer(cc/hiwat/lowat/state): 0 / 9216 / 512 / N/A
Type: 3
Protocol: 58
Connection info: src = ::, dst = ::
Inpcb flags: N/A
Inpcb extflag: INP_EXTRCVICMPERR INP_EXTFILTER
Inpcb vflag: INP_IPV6
Hop limit: 255 (minimum hop limit: 0)
Send VRF: 0xffff
Receive VRF: 0xffff
Table 52 Command output
Field Description
Total RawIP socket number Total number of IPv6 RawIP sockets.
Creator Task name of the socket. The process number is in the square brackets.
State Socket state.
Options Socket options.