282
ipv6 dhcp option-group
Use ipv6 dhcp option-group to create a static DHCPv6 option group and enter its view.
Use undo ipv6 dhcp option-group to delete the specified static DHCPv6 option group.
Syntax
ipv6 dhcp option-group option-group-number
undo ipv6 dhcp option-group option-group-number
Default
No static DHCPv6 option groups exist.
Views
System view
Predefined user roles
network-admin
Parameters
option-group-number: Assigns an ID to the static option group, in the range of 1 to 100.
Usage guidelines
A static DHCPv6 option group can use the same ID as a dynamic DHCPv6 option group. If a static
DHCPv6 option group and a dynamic DHCPv6 option group use the same ID, the static one takes
precedence over the dynamic one.
Examples
# Create static DHCPv6 option group 1 and enter its view.
<Sysname> system-view
[Sysname] ipv6 dhcp option-group 1
[Sysname-dhcp6-option-group1]
Related commands
display ipv6 dhcp option-group
ipv6 dhcp policy
Use ipv6 dhcp policy to create a DHCPv6 policy and enter its view, or enter the view of an existing
DHCPv6 policy.
Use undo ipv6 dhcp policy to delete a DHCPv6 policy.
Syntax
ipv6 dhcp policy policy-name
undo ipv6 dhcp policy policy-name
Default
No DHCPv6 policies exist.
Views
System view
Predefined user roles
network-admin
To Next Page
Loading...
