26
Field Description
Time exceed:
IP header bad:
Timestamp request:
Timestamp reply:
Information request:
Information reply:
Netmask request:
Netmask reply:
Unknown type:
• Time exceeded packets.
• IP header bad packets.
• Timestamp request packets.
• Timestamp reply packets.
• Information request packets.
• Information reply packets.
• Netmask request packets.
• Netmask reply packets.
• Unknown type packets.
Related commands
display ip interface brief
ip address
display ip interface brief
Use display ip interface brief to display brief IP configuration for Layer 3 interfaces.
Syntax
display ip interface [ interface-type [ interface-number ] ] brief [ description ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type: Specifies an interface type. If you do not specify an interface type, this command
displays brief IP configuration for all Layer 3 interfaces.
interface-number: Specifies an interface number. If you do not specify an interface number, this
command displays brief IP configuration for all Layer 3 interfaces of the specified type.
description: Displays complete interface descriptions. If you do not specify this keyword, the
command displays a maximum of 16 characters for each interface description. If the description is
longer than 16 characters, the first 14 characters are displayed, followed by an ellipsis (...).
Usage guidelines
Information displayed by the command includes the state of the physical and link layer protocols, IP
address, and interface descriptions.
Examples
# Display brief IP configuration for VLAN interfaces.
<Sysname> display ip interface vlan-interface brief
*down: administratively down
(s): spoofing (l): loopback
Interface Physical Protocol IP Address Description
Vlan10 down down 6.6.6.1 Link to CoreRo...
Vlan2 down down 7.7.7.1 --
To Next Page
Loading...
