HPE FlexFabric 5950 Series Command Reference

121
Parameters
all: Displays Option 82 configuration on all Layer 2 Ethernet interfaces.
interface interface-type interface-number: Specifies an interface by its type and number.
Examples
# Display Option 82 configuration on all interfaces.
<Sysname> display dhcp snooping information all
Interface: Bridge-Aggregation1
Status: Disable
Strategy: Drop
Circuit ID:
Padding format: User Defined
User defined: abcd
Format: ASCII
Remote ID:
Padding format: Normal
Format: ASCII
VLAN 10:
Circuit ID: abcd
Remote ID: company
Table 21 Command output
Field Description
Interface Interface name.
Status Option 82 status,
Enable
or
Disable
.
Strategy
Handling strategy for DHCP requests that contain Option 82,
Drop
,
Keep
, or
Replace
.
Circuit ID Content of the Circuit ID sub-option.
Padding format
Padding format of Option 82:
• For Circuit ID sub-option, the padding format can be Normal, User Defined,
Verbose (sysname), Verbose (MAC), or Verbose (user defined).
• For Remote ID sub-option, the padding format can be Normal, Sysname, or
User Defined.
Node identifier Access node identifier.
User defined Content of the user-defined sub-option.
Format
Code type of Option 82 sub-option:
• For Circuit ID sub-option, the code type can be ASCII, Default, or Hex.
• For Remote ID sub-option, the code type can be ASCII or Hex.
Remote ID Content of the Remote ID sub-option.
VLAN
Pads Circuit ID sub-option and Remote ID sub-option in the DHCP packets received
in the specified VLAN.
display dhcp snooping packet statistics
Use display dhcp snooping packet statistics to display DHCP packet statistics for DHCP
snooping.

HPE FlexFabric 5950 Series Specifications

General

Brand	HPE
Model	FlexFabric 5950 Series
Category	Switch
Language	English