76
Examples
# Specify TFTP server address 10.1.1.1 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] tftp-server ip-address 10.1.1.1
Related commands
display dhcp server pool
tftp-server domain-name
valid class
Use valid class to add DHCP user classes to the whitelist.
Use undo valid class to remove DHCP user classes from the whitelist.
Syntax
valid class class-name&<1-8>
undo valid class class-name&<1-8>
Default
No DHCP user class is listed on the whitelist.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
class-name&<1-8>: Specifies a space-separated list of up to eight DHCP user classes by their
names, a case-insensitive string of 1 to 63 characters.
Usage guidelines
For this command to take effect, you must enable the DHCP user class whitelist.
Examples
# Add DHCP user classes test1 and test2 to the whitelist in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] valid class test1 test2
Related commands
dhcp class
verify class
verify class
Use verify class to enable the DHCP user class whitelist.
Use undo verify class to disable the DHCP user class whitelist.
Syntax
verify class
To Next Page
Loading...
Need help?
General