HPE FlexFabric 5950 Series

40
undo dhcp class class-name
Default
No DHCP user classes exist.
Views
System view
Predefined user roles
network-admin
Parameters
class-name: Specifies the name of a DHCP user class, a case-insensitive string of 1 to 63
characters.
Usage guidelines
In the DHCP user class view, you can use the if-match command to configure match rules to group
clients to the user class.
Examples
# Create DHCP user class test and enter DHCP user class view.
<Sysname> system-view
[Sysname] dhcp class test
[Sysname-dhcp-class-test]
Related commands
address range
class ip-pool
class option-group
class range
dhcp policy
if-match
dhcp option-group
Use dhcp option-group to create a DHCP option group and enter its view, or enter the view of an
existing DHCP option group.
Use undo dhcp option-group to delete a DHCP option group.
Syntax
dhcp option-group option-group-number
undo dhcp option-group option-group-number
Default
No DHCP option groups exist.
Views
System view
Predefined user roles
network-admin