HPE FlexFabric 5950 Series

130
Use undo dns domain to delete the specified domain name suffix.
Syntax
dns domain domain-name [ vpn-instance vpn-instance-name ]
undo dns domain domain-name [ vpn-instance vpn-instance-name ]
Default
No domain name suffix is configured. Only the provided domain name is resolved.
Views
System view
Predefined user roles
network-admin
Parameters
domain-name: Specifies a domain name suffix. It is a dot-separated, case-insensitive string that can
include letters, digits, hyphens (-), underscores (_), and dots (.), for example, aabbcc.com. The
domain name suffix can include a maximum of 253 characters, and each separated string includes
no more than 63 characters.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. To configure a domain name suffix for the public network,
do not specify this option.
Usage guidelines
For domain name resolution, the resolver automatically uses the suffix list to supply the missing part
of an incomplete name entered by a user.
A domain name suffix applies to both IPv4 DNS and IPv6 DNS.
The system allows a maximum of 16 domain name suffixes for the public network or each VPN
instance. You can specify domain name suffixes for both public network and VPN instances.
Examples
# Configure domain name suffix com for the public network.
<Sysname> system-view
[Sysname] dns domain com
Related commands
display dns domain
dns dscp
Use dns dscp to set the DSCP value for DNS packets sent by a DNS client or DNS proxy.
Use undo dns dscp to restore the default.
Syntax
dns dscp dscp-value
undo dns dscp
Default
The DSCP value is 0 in DNS packets sent by a DNS client or DNS proxy.
Views
System view