82
Default
The DHCP relay agent periodically refreshes relay entries.
Views
System view
Predefined user roles
network-admin
Usage guidelines
A DHCP client unicasts a DHCP-RELEASE message to the DHCP server to release its IP address.
The DHCP relay agent conveys the message to the DHCP server and does not remove the
IP-to-MAC entry of the client.
With this feature, the DHCP relay agent uses a client's IP address and the relay interface's MAC
address to periodically send a DHCP-REQUEST message to the DHCP server.
• If the server returns a DHCP-ACK message or does not return any message within an interval,
the DHCP relay agent performs the following operations:
{ Removes the relay entry.
{ Sends a DHCP-RELEASE message to the DHCP server to release the IP address.
• If the server returns a DHCP-NAK message, the relay agent keeps the entry.
With this feature disabled, the DHCP relay agent does not remove relay entries automatically. After a
DHCP client releases its IP address, you must use the reset dhcp relay client-information on the
relay agent to remove the corresponding relay entry.
Examples
# Disable periodic refresh of relay entries.
<Sysname> system-view
[Sysname] undo dhcp relay client-information refresh enable
Related commands
dhcp relay client-information record
dhcp relay client-information refresh
reset dhcp relay client-information
dhcp relay dhcp-server timeout
Use dhcp relay dhcp-server timeout to set the DHCP server response timeout time for DHCP
server switchover.
Use undo dhcp relay dhcp-server timeout to restore the default.
Syntax
dhcp relay dhcp-server timeout time
undo dhcp relay dhcp-server timeout
Default
The DHCP server response timeout time is 30 seconds.
Views
Interface view
Predefined user roles
network-admin
To Next Page
Loading...
