HPE FlexFabric 5950 Series

300
Default
No SIP server address or domain name is specified.
Views
DHCPv6 address pool view
DHCPv6 option group view
Predefined user roles
network-admin
Parameters
address ipv6-address: Specifies the IPv6 address of a SIP server.
domain-name domain-name: Specifies the domain name of a SIP server, a case-insensitive string
of 1 to 50 characters.
Usage guidelines
You can specify up to eight SIP server addresses and eight SIP server domain names in an address
pool. A SIP server that is specified earlier has a higher preference.
Examples
# Specify the SIP server address 2:2::4 in DHCPv6 address pool 1.
<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1] sip-server address 2:2::4
# Specify the SIP server domain name bbb.com in DHCPv6 address pool 1.
[Sysname-dhcp6-pool-1] sip-server domain-name bbb.com
Related commands
display ipv6 dhcp pool
static-bind
Use static-bind to statically bind an IPv6 address or prefix to a client in the DHCPv6 address pool.
Use undo static-bind to delete a static binding.
Syntax
static-bind { address ipv6-address/addr-prefix-length | prefix prefix/prefix-len } duid duid [ iaid iaid ]
[ preferred-lifetime preferred-lifetime valid-lifetime valid-lifetime ]
undo static-bind { address ipv6-address/addr-prefix-length | prefix prefix/prefix-len }
Default
No static binding is configured in a DHCPv6 address pool.
Views
DHCPv6 address pool view
Predefined user roles
network-admin
Parameters
address ipv6-address/addr-prefix-length: Specifies the IPv6 address and prefix length. The value
range for the prefix length is 1 to 128.