148
The port number in the URL address is optional. If you do not specify a port number, the default port
number is used. HTTP uses port 80, HTTPS uses port 443, and the PeanutHull server uses port
6060.
The system automatically performs the following tasks:
• Fills <h> with the FQDN that is specified when the DDNS policy is applied to an interface.
• Fills <a> with the primary IP address of the interface to which the DDNS policy is applied.
Y
ou can also manually spe
cify an FQDN and an IP address in <h
> and <a>, respectively
. In this case,
the FQDN that is specified when the DDNS policy is applied to an interface will not take effect. As a
best practice, do not manually change the <h> and <a> because your configuration might be
incorrect.
You cannot specify an FQDN and IP address in the URL address for contacting the PeanutHull
server. Alternatively, you can specify an FQDN when applying the DDNS policy to an interface. The
system automatically uses the primary IP address of the interface to which the DDNS policy is
applied as the IP address for DDNS update.
To avoid misinterpretation, do not include colons (:), at signs (@), and question marks (?) in your
login username or password, even if you can do so.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify the URL address for DDNS update requests for DDNS policy steven_policy. The device
contacts www.3322.org for DDNS update.
<Sysname> system-view
[Sysname] ddns policy steven_policy
[Sysname-ddns-policy-steven_policy] url http://
members.3322.org/dyndns/update?system=dyndns&hostname=<h>&myip=<a>
Related commands
ddns policy
display ddns policy
password
username
username
Use username to specify the username for logging in to the DDNS server.
Use undo username to restore the default.
Syntax
username username
undo username
Default
No username is specified for logging in to the DDNS server.
Views
DDNS policy view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General