HPE FlexFabric 5950 Series

158
Table 32 Command output
Field Description
SIP Source IP address.
SPort Source port number.
DIP Destination IP address.
DPort Destination port number.
Pro Protocol number.
Input_If
Input interface type and number.
If no interface is involved in fast forwarding, this field displays
N/A
.
If the input interface does not exist, this field displays a hyphen (-).
ID Fragment ID.
Related commands
reset ip fast-forwarding cache
ip fast-forwarding aging-time
Use ip fast-forwarding aging-time to configure the aging time for fast forwarding entries.
Use undo ip fast-forwarding aging-time to restore the default.
Syntax
ip fast-forwarding aging-time aging-time
undo ip fast-forwarding aging-time
Default
The aging time is 30 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
aging-time: Specifies the aging time in the range of 10 to 300 seconds.
Examples
# Set the aging time to 20 seconds for fast forwarding entries.
<Sysname> system-view
[Sysname] ip fast-forwarding aging-time 20
Related commands
display ip fast-forwarding aging-time
ip fast-forwarding load-sharing
Use ip fast-forwarding load-sharing to enable fast forwarding load sharing.
Use undo ip fast-forwarding load-sharing to disable fast forwarding load sharing.