HPE FlexFabric 5950 Series

10
Field Description
VPN Instance
Name of VPN instance. If no VPN instance is configured for the ARP entry, this
field displays
[No Vrf]
.
VSI Name
Name of the VSI to which the ARP entry belongs. If the ARP entry does not
belong to any VSI, this field displays
N/A
.
VSI Interface
Name of the virtual switch interface that is the output interface in an ARP entry.
If the output interface in the ARP entry is not a virtual switch interface, this field
displays
N/A
.
Total number of entries Number of ARP entries.
Related commands
arp static
reset arp
display arp ip-address
Use display arp ip-address to display the ARP entry for an IP address.
Syntax
display arp ip-address [ slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ip-address: Displays the ARP entry for the specified IP address.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for the master device.
verbose: Displays the detailed information about the specified ARP entry.
Usage guidelines
The ARP entry information includes the IP address, MAC address, VLAN ID, output interface, entry
type, and aging timer.
Examples
# Display the ARP entry for the IP address 20.1.1.1.
<Sysname> display arp 20.1.1.1
Type: S-Static D-Dynamic O-Openflow R-Rule M-Multiport I-Invalid
IP Address MAC Address VID Interface/Link ID Aging Type
20.1.1.1 00e0-fc00-0001 N/A N/A N/A S
Related commands
arp static
reset arp