HPE FlexFabric 5950 Series

35
Related commands
display dhcp server pool
bootfile-name
Use bootfile-name to specify a configuration file name or URL.
Use undo bootfile-name to restore the default.
Syntax
bootfile-name { bootfile-name | url }
undo bootfile-name
Default
No configuration file name or URL is specified.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
bootfile-name: Specifies the configuration file name, a case-sensitive string of 1 to 63 characters.
url: Specifies the HTTP URL of the configuration file. It is a case-sensitive string of 1 to 63 characters.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
To specify a configuration file on a TFTP server, use the bootfile-name argument.
To specify a configuration file on an HTTP server, use the url argument.
Examples
# Specify configuration file name boot.cfg in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bootfile-name boot.cfg
# Specify configuration file URL http://10.1.1.1/boot.cfg in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bootfile-name http://10.1.1.1/boot.cfg
Related commands
display dhcp server pool
next-server
tftp-server domain-name
tftp-server ip-address
class ip-pool
Use class ip-pool to specify a DHCP address pool for a DHCP user class.