HPE FlexFabric 5950 Series

268
Field Description
In-use Number of assigned prefixes.
Static Number of statically bound prefixes.
Assigned length Length of assigned prefixes.
Total prefix number Number of prefixes.
display ipv6 dhcp server
Use display ipv6 dhcp server to display DHCPv6 server configuration information.
Syntax
display ipv6 dhcp server [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays DHCPv6 server configuration information for the
specified interface. If you do not specify an interface, this command displays DHCPv6 server
configuration information for all interfaces.
Examples
# Display DHCPv6 server configuration information for all interfaces.
<Sysname> display ipv6 dhcp server
Interface Pool
Vlan-interface2 1
Vlan-interface3 global
# Display DHCPv6 server configuration information for the interface VLAN-interface 2.
<Sysname> display ipv6 dhcp server interface vlan-interface 2
Using pool: 1
Preference value: 0
Allow-hint: Enabled
Rapid-commit: Disabled
Table 60 Command output
Field Description
Interface Interface enabled with DHCPv6 server.
Pool
Address pool applied to the interface.
If no address pool is applied to the interface,
global
is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.
Using pool
Address pool applied to the interface.
If no address pool is applied to the interface,
global
is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.