HPE FlexFabric 5950 Series

103
• Using the MAC address of an interface to generate a client ID.
Whichever method you use, make sure the IDs for different DHCP clients are unique.
Examples
# Use a hexadecimal number of FFFFFFFF as the client ID for VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] dhcp client identifier hex FFFFFFFF
Related commands
display dhcp client
display dhcp client
Use display dhcp client to display DHCP client information.
Syntax
display dhcp client [ verbose ] [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed DHCP client information. If you do not specify this keyword, the
command displays brief DHCP client information.
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface, this command displays DHCP client information on all interfaces.
Examples
# Display brief DHCP client information on all interfaces.
<Sysname> display dhcp client
Vlan-interface10 DHCP client information:
Current state: BOUND
Allocated IP: 40.1.1.20 255.255.255.0
Allocated lease: 259200 seconds, T1: 129600 seconds, T2: 226800 seconds
DHCP server: 40.1.1.2
# Display detailed DHCP client information on all interfaces.
<Sysname> display dhcp client verbose
Vlan-interface10 DHCP client information:
Current state: BOUND
Allocated IP: 40.1.1.20 255.255.255.0
Allocated lease: 259200 seconds, T1: 129600 seconds, T2: 226800 seconds
Lease from May 21 19:00:29 2012 to May 31 19:00:29 2012
DHCP server: 40.1.1.2
Transaction ID: 0x1c09322d
Default router: 40.1.1.2
Classless static routes: