67
nbns-list
Use nbns-list to specify WINS server addresses in a DHCP address pool.
Use undo nbns-list to remove the specified WINS server addresses.
Syntax
nbns-list ip-address&<1-8>
undo nbns-list [ ip-address&<1-8> ]
Default
No WINS server address is specified.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
ip-address&<1-8>: Specifies a space-separated list of up to eight WINS server IP addresses.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
If you do not specify any parameters, the undo nbns-list command deletes all WINS server
addresses.
Examples
# Specify WINS server address 10.1.1.1 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] nbns-list 10.1.1.1
Related commands
display dhcp server pool
netbios-type
netbios-type
Use netbios-type to specify the NetBIOS node type in a DHCP address pool.
Use undo netbios-type to restore the default.
Syntax
netbios-type { b-node | h-node | m-node | p-node }
undo netbios-type
Default
No NetBIOS node type is specified.
Views
DHCP address pool view
To Next Page
Loading...
Need help?
General