180
display udp statistics
Use display udp statistics to display UDP traffic statistics.
Syntax
display udp statistics [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays UDP traffic statistics for all member devices.
Usage guidelines
UDP traffic statistics include information about received and sent UDP packets.
Examples
# Display UDP traffic statistics.
<Sysname> display udp statistics
Received packets:
Total: 240
checksum error: 0, no checksum: 0
shorter than header: 0, data length larger than packet: 0
no socket on port(unicast): 0
no socket on port(broadcast/multicast): 240
not delivered, input socket full: 0
Sent packets:
Total: 0
Related commands
reset udp statistics
display udp verbose
Use display udp verbose to display detailed information about UDP connections.
Syntax
display udp verbose [ slot slot-number [ pcb pcb-index ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
To Next Page
Loading...
