HPE FlexFabric 5950 Series

36
Use undo class ip-pool to remove the DHCP address pool specified for a DHCP user class.
Syntax
class class-name ip-pool pool-name
undo class class-name ip-pool
Default
No DHCP address pool is specified for a DHCP user class.
Views
DHCP policy view
Predefined user roles
network-admin
Parameters
class-name: Specifies a DHCP user class by its name, a case-insensitive string of 1 to 63
characters.
pool-name: Specifies a DHCP address pool by its name, a case-insensitive string of 1 to 63
characters.
Usage guidelines
You can specify only one DHCP address pool for a DHCP user class in a DHCP policy. If you execute
this command multiple times for a user class, the most recent configuration takes effect.
Examples
# Specify DHCP address pool pool1 for DHCP user class test in DHCP policy 1.
<Sysname> system-view
[Sysname] dhcp policy 1
[Sysname-dhcp-policy-1] class test ip-pool pool1
Related commands
default ip-pool
dhcp policy
dhcp server ip-pool
class option-group
Use class option-group to specify a DHCP option group for a DHCP user class.
Use undo class option-group to remove the configuration.
Syntax
class class-name option-group option-group-number
undo class class-name option-group
Default
No DHCP option group is specified for a DHCP user class.
Views
DHCP address pool view
Predefined user roles
network-admin