201
Field Description
Flags
Route flag:
• U—Usable route.
• G—Gateway route.
• H—Host route.
• B—Black hole route.
• D—Dynamic route.
• S—Static route.
• R—Recursive route.
• F—Fast re-route.
Time stamp Time when the IPv6 FIB entry was generated.
Label Inner MPLS label.
Interface Outgoing interface.
Token Label switched path index number.
display ipv6 icmp statistics
Use display ipv6 icmp statistics to display ICMPv6 packet statistics.
Syntax
display ipv6 icmp statistics [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays ICMPv6 packet statistics for all member devices.
Examples
# Display ICMPv6 packet statistics.
<Sysname> display ipv6 icmp statistics
Input: bad code 0 too short 0
checksum error 0 bad length 0
path MTU changed 0 destination unreachable 0
too big 0 parameter problem 0
echo request 0 echo reply 0
neighbor solicit 0 neighbor advertisement 0
router solicit 0 router advertisement 0
redirect 0 router renumbering 0
output: parameter problem 0 echo request 0
echo reply 0 unreachable no route 0
unreachable admin 0 unreachable beyond scope 0
unreachable address 0 unreachable no port 0
too big 0 time exceed transit 0
To Next Page
Loading...
