HPE FlexFabric 5950 Series

223
display ipv6 udp verbose
Use display ipv6 udp verbose to display detailed information about IPv6 UDP connections.
Syntax
display ipv6 udp verbose [ slot slot-number [ pcb pcb-index ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pcb pcb-index: Displays detailed information about IPv6 UDP connections of the specified PCB. The
value range for the pcb-index argument is 1 to 16.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays detailed information about IPv6 UDP connections for all member
devices.
Examples
# Display detailed information about an IPv6 UDP connection.
<Sysname> display ipv6 udp verbose
Total UDP socket number: 1
Location: slot: 6
Creator: sock_test_mips[250]
State: N/A
Options: N/A
Error: 0
Receiving buffer(cc/hiwat/lowat/drop/state): 0 / 41600 / 1 / 0 / N/A
Sending buffer(cc/hiwat/lowat/state): 0 / 9216 / 512 / N/A
Type: 2
Protocol: 17
Connection info: src = ::->69, dst = ::->0
Inpcb flags: N/A
Inpcb extflag: N/A
Inpcb vflag: INP_IPV6
Hop limit: 255 (minimum hop limit: 0)
Send VRF: 0xffff
Receive VRF: 0xffff
Table 56 Command output
Field Description
Total UDP socket number Total number of IPv6 UDP sockets.
Creator Task name of the socket. The progress number is in the square brackets.
State Socket state.
Options Socket options.