HPE FlexFabric 5950 Series

126
DNS commands
display dns domain
Use display dns domain to display the domain name suffixes.
Syntax
display dns domain [ dynamic ] [ vpn-instance vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dynamic: Displays the domain name suffixes dynamically obtained through DHCP or other protocols.
If you do not specify this keyword, the command displays the statically configured and dynamically
obtained domain name suffixes.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
displays domain name suffixes for the public network.
Examples
# Display the statically configured and dynamically obtained domain name suffixes for the public
network.
<Sysname> display dns domain
Type:
D: Dynamic S: Static
No. Type Domain suffix
1 S com
2 D net
Table 23 Command output
Field Description
No. Sequence number.
Type
Domain name suffix type:
• S—A statically configured domain name suffix.
• D—A domain name suffix dynamically obtained through DHCP or other protocols.
Domain suffix Domain name suffixes.
Related commands
dns domain
display dns host
Use display dns host to display information about domain name-to-IP address mappings.