306
Field Description
Information-request Number of received information request packets.
Relay-forward Number of received relay-forward packets.
Relay-reply Number of received relay-reply packets.
Packets sent Number of sent packets.
Advertise Number of sent advertise packets.
Reconfigure Number of sent reconfigure packets.
Reply Number of sent reply packets.
Relay-forward Number of sent Relay-forward packets.
Relay-reply Number of sent Relay-reply packets.
Related commands
reset ipv6 dhcp relay statistics
gateway-list
Use gateway-list to specify gateway addresses for DHCPv6 clients in a DHCPv6 address pool.
Use undo gateway-list to remove gateway addresses from a DHCPv6 address pool.
Syntax
gateway-list ipv6-address&<1-8>
undo gateway-list [ ipv6-address&<1-8> ]
Default
No gateway address is specified in a DHCPv6 address pool.
Views
DHCPv6 address pool view
Predefined user roles
network-admin
Parameters
ipv6-address&<1-8>: Specifies a space-separated list of up to eight addresses.
Usage guidelines
DHCPv6 clients of the same access type can be classified into different types by their locations. In
this case, the relay interface typically has no IPv6 address configured. You can use the gateway-list
command to specify gateway addresses for clients matching the same DHCPv6 address pool.
Upon receiving a DHCPv6 Solicit or Request from a client that matches a DHCPv6 address pool, the
relay agent processes the packet as follows:
• Fills the link-address field of the packet with a specified gateway address.
• Forwards the packet to all DHCPv6 servers in the matching DHCPv6 address pool.
The DHCPv6 servers select a DHCPv6 address pool according to the gateway address.
Examples
# Specify the gateway address 10::1 in the DHCPv6 address pool p1.
<Sysname> system-view
To Next Page
Loading...
Need help?
General