HPE FlexFabric 5950 Series

142
Related commands
ddns apply policy
display ddns policy
display ddns policy
Use display ddns policy to display information about DDNS policies.
Syntax
display ddns policy [ policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies a DDNS policy by its name, a case-insensitive string of 1 to 32 characters. If
you do not specify a DDNS policy, this command displays information about all DDNS policies.
Examples
# Display information about DDNS policy steven_policy.
<Sysname> display ddns policy steven_policy
DDNS policy: steven_policy
URL : http://members.3322.org/dyndns/update?
system=dyndns&hostname=<h>&myip=<a>
Username : steven
Password : ******
Method : GET
SSL client policy:
Interval : 1 days 0 hours 1 minutes
# Display information about all DDNS policies.
<Sysname> display ddns policy
DDNS policy: steven_policy
URL : http://members.3322.org/dyndns/update?system=
dyndns&hostname=<h>&myip=<a>
Username : steven
Password : ******
Method : GET
SSL client policy:
Interval : 0 days 0 hours 30 minutes
DDNS policy: tom-policy
URL : http://members.3322.org/dyndns/update?system=
dyndns&hostname=<h>&myip=<a>
Username :
Password :
Method : GET