216
Field Description
• IN6P_RTHDRDSTOPTS—Receives the destination options extension
header preceding the routing extension header.
• IN6P_TCLASS—Receives the traffic class of the packet.
• IN6P_AUTOFLOWLABEL—Attaches a flow label automatically.
• IN6P_RFC2292—Uses the API specified in RFC 2292.
• IN6P_MTU—Discovers differences in the MTU size of every link along
a given data path. TCP does not support this flag.
• INP_RCVMACADDR—Receives the MAC address of the frame.
• INP_USEICMPSRC—Uses the specified IPv6 address as the source
IPv6 address for outgoing ICMP packets.
• INP_SYNCPCB—Waits until Internet PCB is synchronized.
• N/A—None of the above flags.
Inpcb extflag
Extension flags in the Internet PCB:
• INP_EXTRCVPVCIDX—Records the PVC index of the received
packet.
• INP_RCVPWID—Records the PW ID of the received packet.
• INP_EXTRCVICMPERR—Receives an ICMP error packet.
• INP_EXTFILTER—Filters the contents in the received packet.
• N/A—None of the above flags.
Inpcb vflag
IP version flag in the Internet PCB:
• INP_IPV4—IPv4 protocol.
• INP_IPV6—IPv6 protocol.
• INP_IPV6PROTO—Creates an Internet PCB based on IPv6 protocol.
• INP_TIMEWAIT—In TIMEWAIT state.
• INP_ONESBCAST—Sends broadcast packets.
• INP_DROPPED—Protocol dropped flag.
• INP_SOCKREF—Strong socket reference.
• INP_DONTBLOCK—Do not block synchronization of the Internet PCB.
• N/A—None of the above flags.
Hop limit Hop limit in the Internet PCB.
Send VRF Sent instances.
Receive VRF Received instances.
display ipv6 statistics
Use display ipv6 statistics to display IPv6 and ICMPv6 packet statistics.
Syntax
display ipv6 statistics [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays IPv6 and ICMPv6 packet statistics for all member devices.
To Next Page
Loading...
