20
ARP snooping commands
arp snooping enable
Use arp snooping enable to enable ARP snooping.
Use undo arp snooping enable to disable ARP snooping.
Syntax
arp snooping enable
undo arp snooping enable
Default
ARP snooping is disabled.
Views
VLAN view
Predefined user roles
network-admin
Examples
# Enable ARP snooping for VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] arp snooping enable
display arp snooping
Use display arp snooping to display ARP snooping entries.
Syntax
display arp snooping [ vlan vlan-id ] [ slot slot-number ] [ count ]
display arp snooping ip ip-address [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Displays ARP snooping entries for a VLAN. The vlan-id argument is in the range of 1 to
4094.
count: Displays the number of the ARP snooping entries.
ip ip-address: Displays the ARP snooping entry for the specified IP address.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays ARP snooping entries for the master device.
To Next Page
Loading...
Need help?
General