EasyManua.ls Logo

HPE FlexFabric 5950 Series

HPE FlexFabric 5950 Series
363 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
161
IP address Routing interface Physical interface Type
0.0.0.0 Tun1 Tun1 Tunnel
# Display the number of IPv4 adjacency entries for the specified slot.
<Sysname> display adjacent-table slot 1 count
Total entries on slot 1: 1
Table 33 Command output
Field Description
IP address
IP address of the next hop.
• For a P2P link, the IP address of the next hop is not needed. This field
displays 0.0.0.0.
• For an NBMA link, the value 0.0.0.0 indicates the default adjacency
entry. Packets are forwarded through the default virtual circuit.
Routing interface Output interface of the matching route entry.
Physical interface Physical interface of which the outgoing packets are sent out.
Logical interface
Logical interface for sending the packets. If the entry has no logical
interface, this field displays
N/A
.
Service type/Type Link layer protocol type, such as PPP, HDLC, Tunnel, and MTunnel.
Action type Packet processing type,
Forwarding
or
Drop
.
Link media type
Link media type:
• P2P—Point-to-point link.
• NBMA—Non-broadcast multi-access link.
VPN index Index of the VPN.
Virtual circuit information
Information about the virtual circuit, such as PVC or DLCI. If the entry has
no virtual circuit, this field displays
N/A
.
Link head information(IP) Link layer header for IPv4.
Link head information(MPLS) Link layer header for MPLS.

Table of Contents

Other manuals for HPE FlexFabric 5950 Series

Related product manuals