Icom ID-31A

7
7-1
Section 7
MEMORY CHANNEL PROGRAMMING
General description ■ ....................................................... 7-2
Memory channel contents D ......................................... 7-2
Memory channel selection ■ ............................................. 7-3
Selecting a call channel ■ ................................................. 7-3
Memory channel programming ■ ...................................... 7-4
Copying memory and Call channel contents ■ ................. 7-5
Memory or Call channel D VFO .................................. 7-5
Memory or Call channel D 
Another memory or Call channel ............................... 7-6
Memory bank setting ■ ..................................................... 7-7
Assigning a memory channel to a memory bank D ....... 7-7
Directly programming in to a memory bank D ............... 7-8
Memory bank selection ■ ................................................. 7-9
Programming memory/bank/scan name ■ ..................... 7-10
Programming D memory name, bank name
or scan name ............................................................ 7-10
Selecting a memory name display ■ .............................. 7-12
Memory clearing ■ .......................................................... 7-13