10
MENU SCREEN OPERATION
10-44
■ My Station items
My Call Sign
My Station > My Call Sign(MY CALL SIGN)
The transceiver has a total of 6 memories to store your own call signs.
A call sign of up to 8 digits can be entered.
Also, a note of up to 4 characters, for operating radio type, area, and so on,
can be entered.
Call Sign
4 character note
Number (MY1 to MY6)
• See page 2-5 for MY call sign programming.
• To select a different My Call Sign, push D-pad() to select, and then push
D-pad(Ent) to set.
TX Message
My Station > TX Message(TX MESSAGE)
The transceiver has a total of 5 memories to store short messages for si-
multaneous transmission in the DV mode.
Enter a message of up to 20 alphanumeric characters for each memory.
TX Message edit screen
• See page 4-2 for TX message programming.
• To changing the TX Message, push D-pad() to select, and then push D-
pad(Ent) to set.
• When no message transmission is necessary, select “OFF.”
To Next Page
Loading...
