11
OTHER FUNCTIONS
11-12
Cloning function ■
Transceiver-to-Transceiver cloning using a microSD card (Continued) D
Push D-pad(Ent) to fix the file name. r
The confirmation screen “Save file?” appears.
Push D-pad( t ) to select “YES,” then push D-pad(Ent)
to save.
• While saving, a progress bar is displayed, then the “SD
CARD” screen is displayed after the save is completed.
Push [MENU] y to return to the operating dis-
play.
2. Remove the microSD card from the master trans-
ceiver, then attach it to the sub transceiver.
Turn OFF the master transceiver. u
• Hold down the master transceiver’s .
Remove the microSD card from the master trans- i
ceiver as shown at right.
Attach the removed microSD card to the sub trans- o
ceiver, then turn ON the power.
3. Loads the setting data into the sub transceiver.
!0 Push [MENU] .
!1 To display the SETTING LOAD screen, push
D-pad() to select the root item (SD card), and then
push D-pad(Ent) to go to the next level.
(Continued to the next page…)
Push in the mi-
croSD card until click
sounds.
Pull out the microSD
card.
Cover Cover
• Removing the microSD card
To Next Page
Loading...
