Icom ID-31A - Cloning Function

11
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
11-11
■ Cloning function
The ID-31A/E has data cloning capability. This function
is useful when you want to copy all of the programmed
contents from one ID-31A/E to another.
And PC cloning is also possible.
• Transceiver-to-Transceiver cloning using a mi-
croSD card (described on this page)
• Transceiver-to-Transceiver cloning using a cable
(see page 11-15)
• Cloning from a PC using a microSD card
(see page 11-14)
• Cloning from a PC using an optional data cable
(see page 11-14)
D Transceiver-to-Transceiver cloning using a microSD card
In this caption, describes cloning method using the mi-
croSD card. Memory channel contents, MENU item set-
tings and repeater list can be stored onto a microSD card.
Recorded voice memories are not included in the clon-
ing data. To play back the master transceiver’s voice
memory, attach the microSD card to sub transceiver,
or make a copy onto the sub transceiver’s microSD
card using a PC.
* Describes the case of the microSD card has already been
attached.
1. Saving the master transceiver’s setting data
onto the microSD card.
Push [MENU] q
.
To display the Save setting screen, push D-pad( w )
to select the root item (SD card), and then push D-
pad(Ent) to go to the next level.
Push D-pad( e ) to select “<<New File>>,” and then
push D-pad(Ent).
• The FILE NAME screen is displayed.
The file name is automatically named in the follow- r
ing manner;
• Setyyyymmdd_xx (yyyy:Year, mm:month, dd:day, xx: se-
rial number)
• Example: When the 2nd file is saved on 1
December, 2011, the file is named
“Set20111201_02.”
• If you want to change the le name, see “Save with a
different file name” (p. 12-7).
(Continued to the next page…)
Select “<<New File>>”
SETTING SAVE screen
D-pad
(�)
(Ent)
Previous view