4
DR MODE <ADVANCED>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
4-5
When a DV call is received, the calling station and the
repeater’s call signs are stored in the RX HISTORY
screen.
Up to 40 calls can be stored.
Even if the transceiver is turned OFF, the RX record
won’t be deleted.
The stored call signs can be displayed in the following
manner.
D Conrm in the RX History screen
Push [MENU] q .
Push D-pad( w ) to select the root item (“RX Histo-
ry”), and then push D-pad(Ent).
Push D-pad( e ) to select an RX history number be-
tween “RX01” and “RX40.”
• In addition to the RX history number, the call signs of
the caller and called station, RX message, received date
and time are displayed on the LCD.
• If only one call is received, skip step e.
Push D-pad(Ent). r
Push D-pad( t ) to switch the displayed contents of
the RX history.
• CALLER : Shows the call sign of the caller station and
any note programmed after the call sign.
• CALLED : Shows the call sign of the called station.
• RXRPT1 : Shows the call sign of the repeater that
was accessed by the caller station. If it was
a call through a gateway and the internet,
this item displays the gateway repeater call
sign of your local area repeater.
• Rx RPT2 : Shows the call sign of the repeater you re-
ceived the call from.
• MESSAGE : Shows any message included in the re-
ceived call, if programmed.
• RX TIME : Shows the date and time the call was re-
ceived.
• When the received call includes GPS position data, it is
displayed after RX TIME.
Push [MENU] y to exit the MENU screen.
Information ✓
You can delete the RX HISTORY data.
On the RX HISTORY screen, push ➥ , and push
D-pad() to select “Delete” or “Delete All.” And then
push D-pad(Ent).
■ Received call sign confirmation
RX history
number
When the received call includes the GPS
position data, it is displayed after RX TIME.
To Next Page
Loading...
