Icom ID-31A

9
PRIORITY WATCH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
9-31
Checks the memory channel (priority channel) ev-
ery 5 seconds, while receiving a repeater in the DR
mode.
Push [M/CALL] q
to select the memory mode.
Rotate [DIAL] to select the channel you want to w
watch.
Hold down [DR] e
for 1 second to select the DR
mode.
Push D-pad( r ) to select the “FROM”
(Access repeater) item.
D-pad
(�)
(Ent)
Rotate [DIAL] to select the desired repeater. t
Push y
.
Push D-pad( u ) to select “PRIO Watch,” and then
push D-pad(Ent).
• ON : When a signal is received on the priority
channel, the Call channel mode is auto-
matically selected.
• Bell : When a signal is received on the priority
channel, a beep sounds and the “PRIO”
icon blinks on the DR mode screen.
Push D-pad( i ) to select “ON” or “Bell,” and then
push D-pad(Ent).
• The “PRIO” icon is displayed and the priority scan
starts.
• To cancel the scan, push [CLR]
.
■ DR MODE AND MEMORY CHANNEL
Push .
Hold down [DR]
for 1 sec-
ond.
Appears Appears
[DIAL]
Checks the memory
channel every 5 sec-
onds.
Example: Checks memory channel “490” every 5 sec-
onds, while receiving the repeater in the DR
mode.
(Continued on page 9-32.)
Previous view