7
MEMORY CHANNEL PROGRAMMING
7
7-9
■ Memory bank selection
Push [M/CALL] q once or twice to select the
Memory mode.
Push w to open the Quick Menu screen.
Push D-pad( e ) to select “Bank Select,” and then
push D-pad(Ent).
Rotate [DIAL] to select a desired bank group, “A” r
to “Z.”
• Only Bank groups that have memory channels assigned
to them are displayed.
Push D-pad(Ent). t
Rotate [DIAL] to select a desired bank channel. y
• Only assigned Bank channels are displayed.
• To return to the Memory channels display, repeat steps
w to t, and select “OFF” in step r.
[DIAL]
Push [M/CALL]
once or twice to select
the Memory mode
Push
to open the
Quick Menu screen.
Then, select
“Bank Select.”
Rotate [DIAL] to select
the bank group “A.”
Push D-pad(Ent) to
confirm.
Rotate [Dial] to se-
lect a desired bank
channel.
[Example]: Selecting the bank group “A.”
To Next Page
Loading...
