12
USING A MICROSD CARD
12
12-3
■ microSD card insertion and removal
Shows status
D microSD card insertion
Turn OFF the transceiver. q
Lift OFF the [micro SD] slot cover on the side pan- w
el.
With the terminals facing the front, insert the card e
into the slot until it locks in place, and makes a ‘click’
sound.
DO NOT touch the terminals.
Firmly close the [micro SD] slot cover. r
• If you use a brand new microSD card, format the mi-
croSD card do the following steps.
• Formatting a card erases all its data. Before format-
ting any programmed card, make a backup file onto
your PC.
Turn ON the transceiver. q
Push [MENU] w .
Push D-pad( e ) to select the root item (“SD Card”),
and then push D-pad (Ent).
Push D-pad( r ) to select “Format,” and then push
D-pad (Ent).
• The conrmation screen “Format OK?” appears.
Push D-pad( y ) to select “YES,” and then push D-
pad(Ent) to format.
• The formatting starts and the status is displayed.
After formatting, the display automatically returns to u
the SD CARD menu.
Push [MENU] i to exit the MENU screen.
CAUTION:
After a microSD card is
attached, firmly close the
[micro SD] slot cover as
shown to the right.
Wrong
Correct
Close the cover without
a gap.
Terminals facing
the front
microSD card
[micro SD] slot
Slot cover
To Next Page
Loading...
