Icom ID-31A

4
DR MODE <ADVANCED>
4-34
■ Repeater detail screen
According to the programmed contents, such as posi-
tion data, UTC offset, and so on, the distance between
your position and the repeater or repeater time can be
displayed on the REPEATER DETAIL screen.
Example: Shows the “Hirano430” repeater detail
screen
Hold down q for 1 second.
• The DR mode is selected.
Push D-pad( w ) to select “TO,” and then push D-
pad(Ent).
Push D-pad( e ) to select “Gateway CQ,” and then
push D-pad(Ent).
Push D-pad( r ) to select “11:Japan,” and then push
D-pad(Ent).
Push D-pad( t ) to select “Hirano430,” and then
push D-pad(Ent).
Push y .
Push D-pad( u ) to select “Detail,” and then push D-
pad(Ent).
• The REPEATER DETAIL screen is displayed.
Push D-pad(Ent) to return to the RPT LIST screen. i
While in the DR mode, and if you set the repeater as
shown to the right, the repeater details screen can be
displayed.
Push q to display the quick menu screen.
Push D-pad( w ) to select “Repeater Detail,” and
then push D-pad(Ent).
• The REPEATER DETAIL screen is displayed.
* When the position data accuracy level is set to “Approxi-
mate,” direction data is not displayed if the distance to the
repeater is under 5 kilometers.
Repeater
name
Sub name
Group
number
Call sign
Duplex setting
Repeater time
Repeater frequency
Distance from your position
Direction from your position*
Repeater is set to “FROM” “Repeater Detail” is selected
D-pad
(�)
(Ent)
Previous view