EasyManua.ls Logo

Icom ID-31A

Icom ID-31A
293 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
DR MODE <PREPARATION>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
2-3
Communication Form
In the DR mode, the transceiver has three communica-
tion forms as shown below.
• Local area call : To call a station through your local
area (access) repeater.
• Gateway call : To call through your local area (ac-
cess) repeater, repeater gateway,
and the internet to your destination
repeater or individual station’s last
used repeater, using call sign rout-
ing.
• Simplex call : To call a station through no repeater.
NOTE:
• Programming the repeater list is required for DR mode operation. (pp. 4-21 to 4-28)
You cannot make an Internet contact if your access repeater has no gateway.
Before operating in the DV mode, be sure to check whether the repeater is busy, or not. If the repeater is busy,
wait until it is clear, or ask for a “break” using a method acceptable to your local procedures.
Access repeater
Local area call
Gateway call
Simplex call
Hamacho430
repeater
Hamacho area
Hirano area Sapporo area
Hirano430
repeater
Sapporo430
repeater
Previous view

Table of Contents

Other manuals for Icom ID-31A

Related product manuals