10
MENU SCREEN OPERATION
10
10-63
Standby Beep (Default: ON)
Sounds > Standby Beep(STANDY BEEP)
Turn the standby beep function ON or OFF.
This function sounds a beep after a received signal disappears.
• OFF : Turns the function OFF.
• ON : Turns the function ON to sound a beep.
• ON (to me: High Tone) : Turns the function ON to sound a beep. If the
signal is addressed to your call sign, a high beep
sounds.
• The standby beep sounds even when “OFF” is selected in Key-touch beep.
• The standby beep output level follows the Beep level setting.
Scope AF Output (Default: ON)
Sounds > Scope AF Output(SCOPE AF OUTPUT)
Select the audio output option during a sweep by the Band Scope func-
tion.
• OFF : No audio sounds during the sweep.
• ON : The audio sounds during the sweep.
To Next Page
Loading...
