Icom ID-31A

2
DR MODE <PREPARATION>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
2-5
Your own call sign must be programmed for both digital
voice and low-speed data communications (including
GPS transmission).
You can store up to 6 “MY” call signs, [MY1]–[MY6].
If necessary, enter a note of up to 4 characters, such
as the model of the transceiver, name, area indication,
and so on, after your call sign.
Example: Program “JA3YUA/ID31” into the call sign
memory channel [MY1].
Push [MENU] q .
Push D-pad( w ) to select the root item (“My Sta-
tion”), and then push D-pad(Ent).
D-pad
(�)
(Ent)
Push D-pad( e ) to select “My Call Sign,” and then
push D-pad(Ent).
Push D-pad( r ) to select the call sign memory chan-
nel “1” ([MY1]).
Push t .
Push D-pad( y ) to select “Edit.”
Push D-pad(Ent) to enter the call sign programming u
mode.
• A cursor appears and blinks.
Rotate [DIAL] to select the first digit. (Example: J) i
• A to Z, 0 to 9, / and (Space) can be selected.
• If you make a mistake, push [CLR]
to delete the
selected character, symbol or number.
• Push D-pad(") to enter a space.
• Push D-pad() to move the cursor backward or forward.
Push D-pad( o ") to move the cursor to second digit.
!0 Repeat steps i and o to enter your own call sign
of up to 8 characters, including spaces.
(For example: First, J, then A, then 3, then Y, then U,
then A)
To program a note (up to 4 characters, for operat-
ing radio type, area, and so on.), go to step !1,
otherwise go to step !3.
!1 Push D-pad(") several times to move the cursor to
the right of “/”.
!2 Repeat steps i and o to program the desired 4
character note.
(Example: ID31)
!3 Push D-pad(Ent) to set the programmed call sign
and note.
!4 Push D-pad(Ent) again to save and return to the MY
CALL SIGN screen.
• Two beeps sound.
!5 Push [MENU] to exit the MENU screen.
■ “MY” (Your own call sign) programming
MY1
MY2
NOTE: If you have some D-STAR
®
transceiver, ask
your gateway repeater administrator for details.
Previous view