Icom ID-31A

3
DR MODE <BASIC>
3-16
The TX History stores the name and/or call sign of
up to 20 “TO” (Destination) settings which were used
when you made the calls.
NOTE: If you never transmit a call in the DV mode,
you cannot select “TO” (destination) from the TX
History.
Example: Select the “Hirano430” repeater in the TX
History.
Hold down q for 1 second.
• The DR mode is selected.
Push D-pad( w ) to select “TO,” and then push D-
pad(Ent).
Push D-pad( e ) to select “TX History,” and then push
D-pad(Ent).
Push D-pad( r ) to select “Hirano430,” and then push
D-pad(Ent).
• “Hirano430” is displayed on “TO.”
D “TO” (Destination) setting using the TX History
Information ✓
You can add the TX HISTORY data to the repeater list
or “Your Call Sign” memory, or delete if from there.
Push ➥ on the TX HISTORY screen, then push
D-pad() to select the desired item. And then push
D-pad(Ent).
“Hirano430” setting is completed.
The call sign
of the select-
ed repeater
is displayed.
The Sub
name is
displayed
when a
repeater is
selected.
“TO” (Destination) setting (Continued) ■
D-pad
(�)
(Ent)
Previous view