7
MEMORY CHANNEL PROGRAMMING
7-12
■ Selecting a memory name display
While in the memory mode, the programmed memory
name can be displayed.
Push q [M/CALL] once or twice to select the
Memory mode.
Push w to open the Quick Menu screen.
Push D-pad( e ) to select “Display Type,” and then
push D-pad(Ent).
Rotate [DIAL] to select a desired Display type, and r
then push D-pad(Ent.)
• Freq (Name OFF) :
Displays only the frequency.
• Freq : Displays the large font sized
frequency and small font
sized memory name.
• Name : Displays large font sized
memory name and a small
font sized frequency.
• Freq (Name OFF)
• Freq
• Name
[Example]: When Memory Name [Hirano430] is pro-
grammed into M-CH 007 (439.390MHz).
Push .
Rotate [DIAL] to se-
lect a desired Dis-
play type, and then
push D-pad(Ent).
To Next Page
Loading...
