10
MENU SCREEN OPERATION
10
10-49
■ SPEECH items
RX Call Sign SPEECH (Default: ON (Kerchunk))
SPEECH > RX Call Sign SPEECH(RX CALL SIGN SPEECH)
Turn the RX call sign speech function ON or OFF.
• OFF : No announcement is made even when a call is received.
• ON (Kerchunk) : The calling station's call sign is announced only when it
makes a short transmission.
• ON (All) : The calling station's call sign is always announced.
RX>CS SPEECH (Default: ON)
SPEECH > RX>CS SPEECH(RX>CS SPEECH)
Turn the RX>CS Speech function ON or OFF.
The RX>CS Speech function enables the transceiver to announce the sta-
tion call sign that is selected from a Received Call Record by using
and [DIAL].
• OFF : The station call sign is not announced.
• ON : The station call sign is announced.
Procedure : While holding down
, rotate [DIAL] to select a call sign
from a Received Call Record. After selecting, release ,
and then the selected station call sign is announced.
SPEECH Language (Default: English)
SPEECH > SPEECH Language(SPEECH LANGUAGE)
Set the desired speech pronunciation to English or Japanese.
Alphabet (Default: Normal)
SPEECH > Alphabet(ALPHABET)
Select either “Normal” or “Phonetic Code” to announce the alphabet char-
acter.
• Normal : Normal code is used. (for example: A as eh, B as bee)
• Phonetic Code : Phonetic code is used. (for example: A as Alfa, B as
Bravo)
SPEECH Speed (Default: Fast)
SPEECH > SPEECH Speed(SPEECH SPEED)
Set the speech speed to Low (slow) or High (fast).
SPEECH Level (Default: 7)
SPEECH > SPEECH Level(SPEECH LEVEL)
Enter a volume level number between 0 (OFF), 1 (minimum) and 9 (maxi-
mum) for the voice synthesizer.
The voice synthesizer audio output level from the speaker is linked with
[VOL] setting from the minimum audio volume up to the set level.
To Next Page
Loading...
