Icom ID-31A

5
GPS/GPS-A OPERATION
5-6
Checking GPS Position ■ (Continued)
D Saving your own or received position data
With this function, you can save the position informa-
tion of your station from wherever you are, and also
the position information of the station you received it
from.
The GPS Memory is capable of storing 100 channels
in total, assignable to one of 26 banks, A to Z.
Push q .
Push D-pad( w ) to select “GPS Position,” and then
push D-pad(Ent).
D-pad
(�)
(Ent)
Push D-pad( e ) to select the position information
that you want to save.
• To save the position information of your station,
select : MY Position 1
• To save the position information of the station you
received from, select : RX Position 1
Push r .
Push D-pad( t ) to select “Add To GPS Memory,” and
push D-pad(Ent) to save.
The GPS MEMORY EDIT screen is displayed.
• The position information (Latitude/Longitude) is
automatically added.
• See 5-8 to 5-11 for details on editing position
data.
Push D-pad( y ) to select “<<Add Write>>,” then
push D-pad(Ent).
• The conrmation screen “Add Write?” appears.
Push D-pad( u ) to select “Yes,” and then push D-
pad(Ent).
• The added GPS Memory Channel is saved as [00],
and the previously saved channel numbers are
moved up.
• The channel is added to GPS Memory and returns
to the GPS POSITION screen.
Push [CLR] i to exit the GPS POSITION
screen.
GPS MEMORY EDIT
screen is displayed,
and Latitude/Longitude
is added.
The position
information
selected for
GPS memory
channel [00]
is saved.
Select the MY Po-
sition 1 to save the
position of your sta-
tion.
MY Position1
MY Position1
Previous view