Icom ID-31A

9
PRIORITY WATCH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
9-19
Checks the memory channels (priority channel) every
5 seconds, in sequence, during a VFO scan.
Push [M/CALL] q
to select the memory mode.
Hold down [SCAN] w
for 1 second.
Push D-pad( e ) to select the scan type, and then
push D-pad(Ent) to start the memory scan (p. 8-7).
D-pad
(�)
(Ent)
Push r .
Push D-pad( t ) to select “PRIO Watch,” and then
push D-pad(Ent).
• ON : When a signal is received on the priority
channel, the memory mode is automati-
cally selected.
• Bell : When a signal is received on the priority
channel, the “
” icon is displayed in
the VFO mode.
Push D-pad( y ) to select “ON” or “Bell,” and then
push D-pad(Ent).
• The “PRIO” icon appears and the priority scan
(VFO frequency and memory scan) starts. (p.
9-15)
Hold down [SCAN] u
for 1 second.
Push D-pad( i ) to select the scan type, and then
push D-pad(Ent) to start the VFO scan (p. 8-4).
• Push [CLR] to cancel the priority scan and VFO
scan.
■ VFO SCAN AND MEMORY SCAN
Push .
Hold down [SCAN]
for 1 second.
Hold down [SCAN]
for 1 second.
Appears
Appears
Appears
Blinks
Blinks
Blinks
Blinks
During the VFO scan
Checks the memory
channel every 5 sec-
onds.
The memory scan starts.
Example: Checks the memory channels every 5 sec-
onds, in sequence, during a VFO scan.
(Continued on page 9-20.)
Previous view