9
PRIORITY WATCH
9-20
When a signal is received.
• When “ON” is selected.
When a signal is received on the priority channel,
the memory mode is automatically selected. The
“PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “BELL” is selected.
When a signal is received on the priority channel,
a beep sounds and the “ ” icon blinks. The VFO
scan resumes.
Blinks
Automatically changes to the memory mode.
Resumes in the VFO mode.
Blinks
Blinks
Blinks
VFO SCAN AND MEMORY SCAN (Continued) ■
To Next Page
Loading...
