Icom ID-31A

3
DR MODE <BASIC>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
3-15
The RX History function stores the name and/or
call sign of up to 40 CALLERs, and the only the last
CALLED call sign that you received.
Even if there was no reply, the CALLED station call
sign is also stored, and you can make a call to the
CALLED station using RX History.
Example: Select “TOM” from RX History.
Hold down q for 1 second.
• The DR mode is selected.
Push D-pad( w ) to select “TO,” and then push D-
pad(Ent).
Push D-pad( e ) to select “RX History,” and then push
D-pad(Ent).
Push D-pad( r ) to select “TOM,” and then push D-
pad(Ent).
• “TOM” is displayed on “TO.”
D “TO” (Destination) setting using the RX History
JA3YUA, this is
JM1ZLK through
JP1YIU Port A*...
JA3YUA, this is
JM1ZLK through
JP1YIU Port A*...
JA3YUA, this is
JM1ZLK through
JP1YIU Port A*...
INTERNET
CALLER
CALLED
The call signs
of CALLER and
CALLED are in
the RX History.
“TOM” setting is completed.
The call sign
of the select-
ed station is
displayed.
Shows
CALLED
Information ✓
To add the RX HISTORY data to memory, push on
the RX HISTORY screen, then push D-pad(Ent).
D-pad
(�)
(Ent)
* Set the repeater node to ‘B’ for 430 MHz band, when you
use in other than Japan. See page 3-1 for details.
Previous view