4
DR MODE <ADVANCED>
4-14
Speech function (Continued) ■
D To announce the RX>CS call sign
The station call sign that is selected from the RX His-
tory by holding down and rotating [DIAL], will be
announced. (RX>CS Speech function, Default: ON)
Push [MENU] q .
Push D-pad( w ) to select the root item (“SPEECH”),
and then push D-pad(Ent).
Push D-pad( e ) to select the root item (“RX>CS
SPEECH”), and then push D-pad(Ent).
Push D-pad( r ) to select “ON.”
Push [MENU] t to exit the MENU screen.
While holding down y , rotating [DIAL] to select
the station call sign.
• After releasing , the selected station call sign is
announced.
NOTE:
While the call sign is being announced, you can-
not hear any received audio, and the audio is not
recorded on the microSD card.
If the call sign is announced while recording, the
recorded contents are silent during the announce-
ment.
‘JM1ZLK’
• When “ON” is selected
To Next Page
Loading...
