12
USING A MICROSD CARD
12-4
■ microSD card removal
D When removing the microSD card
Turn OFF the power. q
Lift OFF the [micro SD] slot cover on the side pan- w
el.
Push in the microSD card until a click sounds, and e
then carefully pull it out.
• DO NOT touch the terminals.
Firmly close the [micro SD] slot cover. r
If removing the microSD card while the transceiver’s
power is ON, do the following procedures.
Push [MENU] q
.
Push D-pad( w ) to select the root item (“SD Card”),
and then push D-pad (Ent).
Push D-pad( e ) to select “Unmount,” and then push
D-pad (Ent).
• The conrmation screen “Unmount OK?” appears.
Push D-pad( r ) to select “YES,” then push D-pad(Ent)
to unmount.
When the unmounting is completed, “Unmount is t
completed.” is displayed, then the screen automati-
cally returns to the SD CARD menu.
Push [MENU] y to exit the MENU screen.
Lift OFF the [micro SD] slot cover on the side pan- u
el.
Push in the microSD card until a click sounds, and i
then carefully pull it out.
• DO NOT touch the terminals.
Firmly close the [micro SD] slot cover. o
CAUTION:
After a microSD card is
attached, firmly close the
[micro SD] slot cover as
shown to the right.
Wrong
Correct
Close the cover without
a gap.
Push in the mi-
croSD card until a
click sounds.
Pull the microSD
card out.
Slot cover Slot cover
To Next Page
Loading...
