5
GPS/GPS-A OPERATION
5-16
■ Transmitting GPS data
Set a GPS sentence to transmit GPS data in DV
mode.
D GPS data sentence setting
Push [MENU] q
and select “GPS.”
Push D-pad( w ) and D-pad(Ent) to select “GPS TX
Mode.”
Push D-pad( e ) and D-pad(Ent) to select “GPS(DV-
G).”
Push D-pad( r ) to select “GPS Sentence” and then
push D-pad(Ent.) The GPS SENTENCE screen is
displayed.
Push D-pad( t ) to select the your desired GPS sen-
tence to edit, and then push D-pad(Ent) to turn it
ON or OFF.
• The selectable GPS sentences are RMC, GGA, GLL,
VTG, GSA and GSV. The GGA sentence is set to ON as
default GPS sentence.
• Push
, then select “Default” by pushing D-pad(Ent)
to set the sentence as the default.
Repeat step y t to set other GPS sentences.
• A maximum of 4 GPS sentences can be set at a time.
Push u [MENU] to exit the Menu screen.
• The display while transmitting GPS (DV-G)
“DV-G” appears if GPS (DV-G)
is selected in DV Mode.
When transmitted, the set GPS
sentence is transmitted.
Sentence
Lon
/Lat
Alt UTC
Date
(UTC)
Status
2D
/3D
COG
(True)
SOG
(knot)
Others
RMC
✔ ✔ ✔ ✔
Mode Indicator,
GGA
✔ ✔ ✔ ✔
Number of satellites in use, HDOP, Geoidal separation,
Age of Differential GPS data
GLL
✔ ✔ ✔
Mode Indicator
VTG
✔ ✔
COG (Magnetic north), SOG (km/h), Mode Indicator
GSA
✔ ✔
ID numbers of satellites used in solution, PDOP, HDOP, VDOP
GSV
Total number of sentences, Sentence number, Total number of sat-
ellites in view, Satellite information (ID, Elevation, Azimuth, S/N)
• Contents of GPS sentence
NOTE:
• Set the GSV sentence to OFF when sending the GPS
message to conventional digital transceivers (IC-2820H,
IC-E2820, ID-800H, IC-91AD, IC-E91, IC-V82, IC-U82,
IC-2200H, ID-1).
• The GSV sentence is incompatible with them.
• Those transceivers will not display GPS messages prop-
erly if a GSV sentence is sent from the ID-31A/E.
• If “Manual” is selected in the GPS select, the GPS sen-
tence is artificially selected and transmitted, according
to the manually set position data in “Manual Position.”
(p. 10-23)
• (MENU > GPS > GPS Set > Manual Position)
• Please note that if “GPS Auto TX” is set to any other set-
ting than “OFF,” the data is transmitted each and every
setting time [PTT] is pushed. (p. 5-24)
• (MENU > GPS > GPS Auto TX)
To Next Page
Loading...
