12
USING A MICROSD CARD
12
12-7
Push [MENU] q .
Push D-pad( w ) to select the root item (“SD Card”),
and then push D-pad (Ent).
Push D-pad( e ) to select “Setting Save,” and then
push D-pad (Ent).
Push D-pad( r ) to select “<<New File>>,” and then
push D-pad (Ent).
• The FILE NAME screen is displayed.
Push [CLR] t to delete the previously programmed
character.
• Push [CLR]
to delete the selected character, sym-
bol or number.
When the cursor does not select a character, the previ-
ous character is deleted.
If [CLR]
is held down, all the characters are de-
leted.
Rotate [DIAL] to select a desired character. y
• The selected character blinks.
• Push D-pad() to move the cursor right or left.
• While selecting a character, push
to change the
character to a upper case or lower case letter.
• While selecting a digit, push
to open the input mode
selection window.
• A space can be selected, even for any input mode se-
lected.
• Push [CLR]
to erase the selected character, or hold
down [CLR]
to continuously erase the characters
after the cursor.
• See page 4-2 for programming details.
(☞ Continued on the next page)
Character type
selection window
■ Save with a different file name
To Next Page
Loading...
