Icom ID-31A

12
USING A MICROSD CARD
12
12-5
■ Save setting data onto a microSD card
Memory channels, item settings in the menu screen,
and repeater lists can be saved on the microSD card.
Saving data settings on the microSD card allows you
to easily restore the transceiver to its previous settings,
even if an all reset is performed.
For your information ✓
Data settings are saved in the “icf” file format that is
used in the CS-31 cloning software.
The saved data on the microSD card can be copied on
a PC and edited by the cloning software.
Data settings can be saved as a new file or overwrite
an older file.
Saved as a new file
Push [MENU] q .
Push D-pad( w ) to select the root item (“SD Card”),
and then push D-pad (Ent).
Push D-pad( e ) to select “Setting Save,” and then
push D-pad (Ent).
Push D-pad( r ) to select “<<New File>>,” and then
push D-pad (Ent).
• The FILE NAME screen is displayed.
• The le name is automatically named in the following
manner; Setyyyymmdd_xx (yyyy: Year, mm: month, dd:
day, xx: serial number)
Example: When the 2nd file is saved on December 1,
2011, the file is named“Set20111201_02”
• If you want to change the le name, see “Save with a
different file name” (p. 12-7).
Push D-pad(Ent) to save the file name. t
• The conrmation screen “Save le?” appears.
Push D-pad( y ) to select “YES,” then push D-pad(Ent)
to save.
• While saving, a progress bar is displayed, then the “SD
CARD” screen is displayed after the save is completed.
Push [MENU] u to exit the MENU screen.
D-pad
(�)
(Ent)
Previous view